| Price | $10,000-250,000 | $899 | $599 | $399 |
| Grade | Genuine Rolex | 3a swiss | swiss | automatic |
| Movement | Rolex Calibre 3135 | Genuine Swiss Clone 3135 movement | Swiss 2836 Movement | Asian 2813 Movement |
| Time Accuracy | -3/+5 sec per day COSC certified | -5/+6 sec per day COSC certified | -10/+10 sec per day COSC certified | -1/+2 min per day COSC certified |
| Stainless Steel Type | 904L Stainless Steel | 904L Stainless Steel | 316L Stainless Steel | 316L Stainless Steel |
| Crystal | Sapphire crystal | Sapphire crystal correct date magnification | Sapphire crystal | Mineral Glass |
| Case Size | 40mm | 40mm | 40mm | 40mm |
| Logo & Markings | laser etchings | Exact on entire watch | 90% Exact on entire watch | 70% Exact on entire watch |
| Dial | Genuine Rolex | Exact detail and font | 90% exact detail and font | 70% Exact detail and font |
| Luminous Markers | Rolex Lumen | SuperLuminova Swiss Lumen | Swiss Lumen | Normal Lumen |
| Waterproof | 100m on standard models | Tested up to 300m | Tested up to 30m | Life waterproof |
| Life expectancy | Lifetime | Lifetime | 3-5 years | 1-2 years |
| Warranty | 2 Years | Up to 5 Years | Up to 3 Years | Up to 1 Years |
| Model | Skeleton Limited Edition |
| Band Length | 18cm |
| Series | Daytona |
| Movement | Automatic |
| Case Color | Silver-tone |
| Brand | Rolex |
| Engine | Mingzhu Engine |
| Gender | Men’s |
| Band Width | 20mm |
Band Material: 316L. The band is the most important part of the watch. 316L swept the major material masters and became the mainstream material for high-end fashion jewelry in Europe and America.
Watch Case: 316L. This watch case uses the best 316L, which not only directly protects the internal parts of the watch, but also determines the performance indicators of the watch to a large extent.
Case Back: Solid. The case uses a thick back cover, which is more waterproof than the transparent bottom. A waterproof sealing ring is added to the through-bottom watch, which makes it difficult to seal.
Crystal: Sapphire Crystal. As an excellent replica watch, we use a special anti-reflective coating to minimize light reflection and provide scratch resistance without affecting its brightness. Tips: The A Replica is applied with mineral glass instead of sapphire.
Hand: Silver-tone. About the watch, the hands is silver-tone that is simple but luxury.
Second Markers: Minute Markers around the outer rim. The minute mark along the outer edge of the glass is a design element that represents time and is called the hand of a clock. This design element is used in many famous designs, such as clocks, clocks, etc.
Dial Markers: luminous dot. Luminous spots are used in many devices to display the time in dark places. These points can actually be used to represent time. After turning on the power, you can find the time with a single tap.
Luminiscence: Hands and Markers. The watch’s luminiscence is hands and markers. With this watch, you will not waste time to check the real-time.
Bezel Material: Stainless Steel. The watch bezel is the most expensive component of the watch. It is made of stainless steel bezel material. It needs to be durable and can resist abrasion. The design of stainless steel bezel material makes it suitable for the watch bezel because of its ability to withstand a lot of pressure and friction.
Clasp: Fold Over Clasp. Our watch uses a folding buckle, which is more durable and stylish.
Water Resistance: 30 meters. The watch’s waterproof depth is 30 meters, full enough for your daily life. Tips: The A Replica is just daily waterproof, need to purchase additional waterproof service which is up to 30 meters.
Reviews
There are no reviews yet.